How Does The Dongfeng 4x2 Water Suction And Sewage Suction Truck Work?

Oct 27, 2025 Leave a message

The Dongfeng 4x2 water suction and sewage suction truck (10CBM capacity) is a specialized sanitation vehicle engineered for collecting, transporting, and discharging liquid waste-with a design tailored to withstand very hot summer conditions. Its operation relies on a coordinated system of vacuum power, hydraulic controls, and durable components, ensuring efficient and safe waste management in tropical or high-temperature environments.

 

Core Working Principle: Vacuum Suction + Hydraulic Discharge

The truck's functionality centers on two key phases: sewage suction and waste discharge, supported by purpose-built parts that align with its 10CBM waste tank capacity and 4x2 drive configuration.

 

1. Sewage Suction Phase

When arriving at a work site (e.g., septic tanks, sewers, or industrial waste pits), the operator first positions the flexible sewage suction pipe (up to 35 meters in length) into the waste source. The truck's water circulation pump-adopting domestic leading vacuum technology-then activates via power from the vehicle's Cummins 180HP diesel engine (transmitted through a Power Take-Off unit). This pump creates negative pressure (vacuum) inside the sealed, 5mm-thick carbon steel tank, drawing liquid waste and small sludge particles up through the suction pipe.

A critical feature during suction is the transparent sewage pipe: operators can monitor the waste level in the tank in real time through this pipe, preventing overfilling (which could damage the pump or cause spills). The truck's suction depth reaches more than 6 meters, allowing it to extract waste from deep pits or underground sewers-essential for urban or industrial waste management.

 

2. Transport Phase

Once the tank is full, the operator secures the suction pipe using the hydraulic reel (a retractable winch with automatic rotation) and locks the tank's rear door via the hydraulic locking mechanism. This prevents leakage during transport, even on uneven roads.

Notably, the truck is equipped with a tropical climate-adapted radiator, which maintains stable engine and pump performance in high temperatures (avoiding overheating that could disrupt operations). During transport, the vacuum and water circulation pumps are fully stopped-per safety guidelines-to reduce engine load and prevent component wear. The vehicle travels at moderate to slow speeds, with no sharp turns or sudden braking: the 10CBM tank lacks internal breakwaters, so slower movement avoids shifting waste that could raise the truck's center of gravity and risk rollovers.

 

3. Waste Discharge Phase

Upon reaching a designated disposal site, the operator initiates discharge using two hydraulic systems:

First, the hydraulic lift raises the tank to a tipping angle of more than 45 degrees-sufficient to guide thick sludge toward the rear.

Next, the hydraulic locking mechanism releases the rear door, and the large-diameter tail drain valve opens. Gravity (aided by the tank's tilt) pulls waste out quickly; the valve's size ensures even discharge of both liquid and small residue, minimizing clogging.

For thorough cleaning, the truck can also use its water suction function: clean water is drawn into a secondary compartment (separate from the sewage tank) and sprayed to rinse the tank's interior after discharge, preparing it for the next use.

 

Key Safety & Operational Tips

To ensure long-term performance, the truck requires adherence to specific guidelines during operation:

Maintain optimal vacuum pump speed: Too high a speed causes rotor overheating; too low adds extra load to the engine. The hand throttle should be pre-adjusted based on pump type.

Discharge only on flat surfaces: Using the hydraulic lift on inclined ground risks component twisting or rollovers.

Never suck materials larger than the hose diameter, nor transport waste oil or hazardous substances-this avoids pipe blockages or tank corrosion.

 

In summary, the Dongfeng 4x2 water and sewage suction truck combines vacuum power, hydraulic control, and heat-resistant design to deliver reliable waste management. Its step-by-step operation-from suction to discharge-prioritizes efficiency and safety, making it a practical choice for hot-climate regions.

 
Dongfeng 4x2 sewage suction truck 
 
news-496-372
sewage-suction-truck
news-496-372
sewage-suction-truck
news-496-372
sewage-suction-truck