Dongfeng Road Sweeper Truck 6-Wheel 170HP with High Pressure Jetting

Universal Cleaning Master

Integrated sweeping and suction: The powerful rolling brush lifts up dust, and the high-power fan instantly sucks in garbage, not even leaving sand particles in the gaps.
High pressure flushing: spraying a fine water curtain to dissolve stubborn stains, making the road surface regain its natural color, as fresh as the first clear after rain.

Environmental Protection and Energy Conservation Pioneer

The circulating water system allows every drop of water to be fully utilized; Low noise homework, safeguarding the tranquility and blue sky of the city, allowing cleanliness and nature to coexist harmoniously.

Smart City Assistant

Equipped with intelligent sensors and IoT systems, real-time monitoring of work status, precise route planning, and using technology to illuminate efficiency and responsibility.

Road sweeper is a professional equipment used for road cleaning, widely used in urban streets, highways, squares and other places. The following are the usage methods and precautions for road sweepers to help you better operate and maintain the equipment.

1, Basic operation of road sweeper
Pre startup inspection

• Oil level: Ensure sufficient fuel, hydraulic oil, and lubricating oil.
• Tires: Check tire pressure and wear.
• Brush: Confirm that the main brush and side brush are not damaged and installed firmly.
• Water tank: Check the water level of the water tank to ensure sufficient cleaning operation.
• Filter: Clean or replace the air filter to ensure the normal operation of the engine.

Initiation Step

Insert the key and start the engine.
Check the dashboard to ensure that all systems are functioning properly.
Turn on the hydraulic system to ensure that the sweeping and vacuuming devices are working properly.
Cleaning operation

• Adjust brush: Adjust the height and angle of the main brush and side brush according to the road conditions.
• Adjust the suction port: Adjust the height of the suction port according to the size of the garbage and the road conditions.
• Select cleaning mode: Choose dry or wet cleaning mode according to the type of garbage. During wet cleaning, the water spray function can be turned on to reduce dust.
• Control vehicle speed: Keep driving at low speed to ensure effective cleaning.

End cleaning

Turn off the sweeping and vacuuming devices.
Turn off the water spray system.
Shut down the hydraulic system.
Turn off the engine and remove the key.

2, Maintenance and upkeep of road sweepers
Routine maintenance

• Cleaning the car body: Clean the car body and brush the garbage after each operation.
• Check the brush: Regularly check the wear of the brush and replace it in a timely manner.
• Check the filter: Regularly clean or replace the filter to ensure the suction effect.
• Check the water tank: Regularly clean the water tank to prevent blockage.

regular maintenance

• Oil change: Regularly change the oil and oil filter according to usage.
• Check the hydraulic system: Regularly check the hydraulic oil level and quality, and replace it in a timely manner.
• Check tires: Regularly check tire wear and pressure, and replace them if necessary.
• Check the electrical system: Regularly inspect the battery, wires, etc. to ensure that the electrical system is functioning properly.

Powerful dust removal system
Equipped with a high-power vacuum cleaner and precision filtering module, it can efficiently remove various debris such as fallen leaves and sand on the road surface, adapt to road scenes of different widths, and achieve zero residue cleaning of gaps.

Deep flushing system
Adopting adjustable high-pressure spray technology, precise cleaning is achieved through multi angle rotating nozzles, which have strong decomposition ability for stubborn pollutants such as hardened stains and oil stains, and also have the function of cooling the road surface in summer.

Intelligent cruise mode
Equipped with environmental sensing sensors and AI path planning system, it supports real-time pollution detection and dynamic adjustment of cleaning parameters, intelligently switches work intensity day and night, and significantly improves resource utilization efficiency.

Extension of Social Value
As an important node in the urban operation and maintenance network, the washing and sweeping vehicle reduces manual labor intensity through mechanized operation, and its standardized cleaning process makes the quality of urban maintenance more controllable. In response to extreme weather, major event security and other scenarios, it demonstrates the value of rapid public service response.

1. Preparation work
Check the vehicle: Ensure that the oil, water, electricity, and other systems of the road sweeper are functioning properly, and that the sweeping and vacuuming devices are not damaged.
Clearing obstacles: removing large pieces of garbage or obstacles from the road surface.
Wear safety equipment: Operators need to wear protective equipment such as reflective clothing and safety helmets.

2. Start the vehicle
Start the engine: Start the road sweeper according to the instructions.
Check the instruments: Ensure that all instruments display normally and there are no alarm signals.

3. Adjust the equipment
Set the brush: Adjust the brush height and angle according to the road conditions.
Start the vacuum system: Ensure that the vacuum system is functioning properly and adjust the suction force.

4. Start cleaning
Low speed driving: Maintain low speed to ensure effective cleaning.
Control the sweeping speed: Adjust the sweeping speed according to the amount of garbage.
Observe the garbage bin: Regularly check the capacity of the garbage bin to avoid overloading.

5. Cleaning completed
Turn off the device: After cleaning is complete, turn off the brush and vacuum system first.
Cleaning the trash can: dump the garbage in the trash can to the designated location.
Cleaning vehicles: Clean the sweeping and vacuuming pipes to keep the vehicle tidy.

6. Parking and maintenance
Parking: Park the vehicle in the designated location and turn off the engine.
Daily maintenance: Regularly inspect vehicles and replace vulnerable parts in a timely manner.

7. Safety precautions
Comply with traffic rules: Pay attention to pedestrians and vehicles around during homework.
Avoid fatigue operation: Operators should maintain good condition and avoid fatigue operation.
Emergency handling: In case of malfunction or emergency, immediately stop the vehicle and take safety measures.

8. Records and Reports
Record work: Record cleaning time, area, and abnormal situations.
Report issues: promptly report equipment malfunctions or road surface problems.

I'm Eden from Hubei Ruili Special Automobile Co, ltd in China. I'm specialized in selling sweeper cars to various markets, including Southeast Asia, Africa, North America, Central Asia and the Middle East.

We are a high-tech manufacturer specializing in specialized automobiles and have a large factory. We have already passed SGS/ISO9001/14001 certification. The brand covers a wide range, including Dongfeng, HOWO, ISUZU, SHACMAN, JAC, JMC and so on. We will equip you with the most suitable vehicle according to your needs.

Hot Tags: dongfeng road sweeper truck 6-wheel 170hp with high pressure jetting, China dongfeng road sweeper truck 6-wheel 170hp with high pressure jetting manufacturers, suppliers, Mounted Vacuum road sweeper truck, Manufacture road sweeper truck, 16cbm road sweeper truck, Sweeping Cleaning Truck, Commins road sweeper truck, road sweeper truck With High Pressure Jetting